AD高温高压染布机AD high temperature and high pressure dyeing machine





AD High Temperature and High Pressure Dyeing Machine with high efficiency and economy is a kind of equipment which can meet the challenge of market demand. It has the characteristics of low production cost and first-class quality of dyed fabric. A well-designed dye circulation system is adopted to make the fabric run smoothly at a very low bath ratio of 1:5-7.

This equipment is especially suitable for dyeing and treating knitted fabrics, light and thin fabrics, wool fabrics and raw fabrics weighing less than 500 grams, light and thin fabrics weighing 80 grams and fabrics with poor water permeability. Many kinds of different fabrics can be dyed everywhere, which has the advantages of high efficiency, low energy consumption, simple operation, convenient maintenance and less floor area. The airborne cloth volume is 250 kg/pipe, and the cloth speed is 150 M-300 m/min.

产品特点 Product characteristics

●缩短工艺时间 Reducing process time

节省工艺耗时,提高生产效率 Save process time and improve production efficiency

深色织物染色时间只需298分钟 The dyeing time of dark fabrics is only 298 minutes.

●耗水量低 Low water consumption

单位布重量耗水量低 Low water consumption per unit cloth weight

更少的排放,更环保 Less emissions, more environmentally friendly

节省蒸汽消耗 Save Steam Consumption

节省污水处理 Save Sewage Treatment

节省染料和化学助剂 Save dyes and chemical additives

●减少耗电量 Reducing power consumption

主泵马达采用变频器软启动 Soft start of main pump motor with frequency converter

较短的染色工艺 Shorter dyeing process

无需停机的先进排放技术 Advanced emission technology without shutdown

●恒定的染色水比 Constant dyeing water ratio

每管在200-250载量范围内染色水比可保持1:5-7 The dyeing water ratio of each tube can be maintained at 1:5-7 within 200-250 load range.

并且运行畅顺 And it runs smoothly.

适应范围 Scope of adaptation


It can meet the dyeing requirements of different weight and width fabrics, and ensure that a cycle is completed in 3 minutes without reducing the dye content.

●更环保 More environmentally friendly

低耗水量 Low water consumption

低能耗 Low energy consumption

低排放量 Low emissions

低耗电量 Low power consumption

标准结构 Standard structure

●机身和所有与染液接触主要部分均采用牌号为SUS316L高度抗腐蚀不锈钢制造The fuselage and all main parts in contact with dye solution are made of SUS316L highly corrosion resistant stainless steel.


High efficiency stainless steel centrifugal pump, variable frequency soft start


The hoist roll is driven by motor controlled by frequency converter


Two-stage adjustable nozzle


Fabric folding device for cloth groove


The twisting self-dissolving device on fabric


Pneumatic control heating and cooling valves with temperature control function.


Pneumatic Valves for Inlet and Discharge Functions


Built-in spray cleaning device


High efficiency heat exchanger


Pressure and exhaust system for fuselage


Level indicator equipped with level sensor


Pigment barrel equipped with feeding pump, valve and mixing function


Distribution roll


Multi-core control cable


Backup filter


All Stainless Steel Working Platform


Fully automatic main control box controller


technical data


Bath ratio: 1:5-7


High Speed: 350 m/min


High working temperature: 140 C

●升温率:25℃-100℃平均3℃/分钟   100℃-130℃平均2.5℃/分钟(千燥饱和蒸汽压力为0.5Mpa)

Temperature rise rate: 25-100 averaging 3 per minute, 100-130 averaging 2.5 per minute (1000-dry saturated vapor pressure is 0.5 Mpa)

●冷却率:130-100平均3℃分钟   100℃-85℃平均2℃/分钟(冷却水为0.3Mpa,25℃)

Cooling rate: 130-100 average 3 min, 100 85 average 2 min (cooling water is 0.3 Mpa, 25)